PENGARUH LAJU KALOR TERHADAP EFISIENSI BOILER PADA PABRIK KELAPA SAWIT

Rahimah; Zulham Effendi; Zakwan

doi:10.47199/jaf.v7i2.382

Authors

Rahimah ITSI
Zulham Effendi
Zakwan

DOI:

https://doi.org/10.47199/jaf.v7i2.382

Abstract

Several factors that affect boiler efficiency in Palm Oil Mill are saturated pressure, feed water temperature, steam temperature, amount of steam produced, amount of fuel consumption, and calorific value of fuel combustion. The purpose of this study is to obtain the relationship between saturated pressure variations and boiler efficiency, the relationship between feed water temperature variations and boiler efficiency, the relationship between variations in the amount of steam produced and boiler efficiency, and to analyze the calorific value of 75% fiber fuel + 25% shell and Water Tube boiler efficiency. From the analysis results that have been carried out, it was obtained that the relationship between saturated pressure variations and boiler efficiency is not constant, but fluctuates. The relationship between feed water temperature variations and boiler efficiency shows an inconsistent pattern, while the relationship between variations in the amount of steam produced and boiler efficiency is relatively constant and increasing. The high combustion calorific value (HHV) is 21323.584 kJ/kg, and the low combustion calorific value (LHV) is 18083.584 kJ/kg. The highest boiler efficiency value produced is 68% and the lowest boiler efficiency value produced is 49%.

Downloads

Download data is not yet available.

References

Aulia, D. (2020). Pengaruh off service high pressure heater terhadap perubahan mass flow rate dan performa PLTU Paiton Unit 9 dengan simulasi Tempo Cycle dan Gambit-Fluent. Institut Teknologi Sepuluh November.

Batubara, P. (2014). Analisa efisiensi water tube boiler berbahan bakar fiber dan cangkang di palm oil mill dengan kapasitas 45 ton TBS/jam. Universitas Sumatera Utara.

Effendi, Z., Aisyah, S., & Hastyanda, R. (2021). Fuel used analysis on boiler efficiency variations and water intake temperature affected by palm oil varieties. Agroindustry Business, 4(1), 94–105. https://doi.org/10.37637/ab.v4i1.634

Firdaus, A., Syamsul, M., & Arif, M. (2016). Creating the standard for specific energy consumption at palm oil industry. Sinergi, 20, 9–13.

Hikmawan, O., Naufa, M., & Simarmata, L. H. (2020). Pemanfaatan cangkang dan serat kelapa sawit sebagai bahan bakar boiler (Utilization of palm kernel shell and fiber as boiler fuel).

Rahman, F., Hafid, S., Jamaluddin, Priyatno, M. S., & Jabir, I. (2024). Analisis efisiensi boiler menggunakan bahan bakar cangkang kelapa sawit dan batubara. Jurnal Teknik Mesin Al-Gazali (AJME), 2(1), 32–41. https://doi.org/10.56923/ajme.v2i01.109

Sianipar, R. R., & Hutabarat, O. S. D. (2020). Analisa mesin boiler pada pabrik pengolahan kelapa sawit di PT Jebsindo Sarana Teknologi. Universitas Medan Area.

Siswanto, J. E. (2020). Analisis limbah kelapa sawit sebagai bahan bakar boiler dengan menggunakan variasi campuran antara fiber dan cangkang buah sawit. Journal of Electrical Power Control and Automation (JEPCA), 3(1), 22–27. https://doi.org/10.33087/jepca.v3i1.35

Sitepu, T., Napitupulu, F. H., Gultom, S., & Sembiring, P. G. (2017). Analisa efisiensi water tube boiler berbahan bakar fiber dan cangkang di palm oil mill dengan kapasitas 45 ton TBS/jam. Jurnal Dinamis, 5(3), 216–7492.

Wulandari, S., & Basri, H. (2022). Analisa energi dan eksergi sistem pembangkit listrik tenaga uap. Buletin Poltanesa, 23(1). https://doi.org/10.51967/tanesa.v23i1.953

Perdana, R. S., & Akhiriyanto, N. (2022). Analisis efisiensi thermal dan eksergi pada pembangkit listrik tenaga panas bumi (pltp) tipe single flash. Prosiding Seminar Nasional Teknologi Energi Dan Mineral, 2(1), 1340–1352. https://doi.org/10.53026/sntem.v2i1.814